Photo to appliqué pattern
Turn a photo into an appliqué pattern
Upload a photo of your pet, a person or a favorite place. The generator turns it into fabric pieces, numbers them in the order you lay them down and prepares a mirrored template for fusible web.
What you receive
- A color placement sheet with every piece numbered in laying order
- A mirrored fusible web template with each piece laid out separately
- Underlap only where a higher piece covers the edge, so visible edges stay exact
Your image remains on the device you are using.
Large areas stay whole. Details sit on top of the pieces beneath them.
Both PDFs are made for A4, A5 or A6 and keep their exact size.
Why layers matter
An appliqué picture is built from the bottom up
If you cut every color area exactly to its outline and lay them side by side, small gaps open between the fabrics as soon as anything shifts. Appliqué avoids that by overlapping. The piece underneath reaches a little further, and the piece on top covers that edge.
The generator decides which piece lies on top. Background pieces come first, then the main subject. Within each group, large pieces come before small ones, so a face lies under its eyes and a meadow under its flowers. Each piece is cut larger only where a higher piece will cover it. Every edge that stays visible is cut exactly on the line.
Large calm areas stay whole, because appliqué pieces can be as big as your fabric allows. That keeps the stitching around the motif instead of through the middle of the sky.
From PDF to fabric
How to use the pattern with fusible web
- Print the placement sheet and the fusible web template at 100 percent. Check the 10 mm control square with a ruler.
- Trace each piece onto the paper side of the fusible web, following the dashed red cutting line. The template is already mirrored.
- Cut the traced pieces out roughly and iron them to the wrong side of the matching fabric. Follow the iron settings on the fusible web packaging.
- Cut each piece exactly on the line and peel off the paper backing.
- Cut the base fabric. For a photo, piece 1 is the base: cut it as one rectangle with some extra margin for the border.
- Lay the pieces on the base in number order, using the placement sheet as a guide. A light box or a sunny window helps you see the lines through the fabric.
- Fuse the pieces with the iron, then stitch around the edges with a zigzag, satin or blanket stitch. A stabilizer behind the base fabric keeps it flat while you sew.
Test the fusible web and your fabrics on a small sample first. Different products need different heat and pressing times.
Choose a useful source
Clear shapes make the best appliqué
One clear subject with visible contrast between its parts works best. A pet facing the camera, a single flower or a simple house usually produce calm pieces that are pleasant to cut and stitch.
When the subject is small in the photo, the generator suggests a closer crop, so eyes and other details stay large enough to cut in fabric. Very small pieces are hard to fuse and stitch; a larger print size or a simpler detail level helps.
Read the image selection guideStart with your own photo
Upload an image, check the color preview and download the placement sheet and the fusible web template.
Open the appliqué generatorQuestions before you begin
Appliqué pattern FAQ
Which appliqué method is the pattern made for
Raw-edge appliqué with fusible web. Visible edges are cut exactly on the line and finished with stitching. Lower pieces get an underlap that slides under the pieces above them, so no gap opens between two fabrics.
Why is the fusible web template mirrored
You trace the pieces onto the paper side of the fusible web, which is then ironed to the wrong side of the fabric. Mirroring makes every piece face the right way once the fabric is turned over.
What does the number on each piece mean
It is the order in which you lay the pieces down. Piece 1 goes first. Background pieces come before the main subject, and larger pieces before the small details that sit on them.
What is the base fabric
For a photo the largest piece at the edge of the picture becomes the base fabric, cut as one rectangle. For an illustration on a plain background, the base can be any fabric you like.
Does my photo leave my device
No. The image is processed in your browser and is not uploaded to a remote image service.
Can I also make a Kinusaiga pattern from the same image
Yes. The generator has a switch between Kinusaiga and appliqué. The colors stay the same; only the pieces and the downloads change.